How to Flash OPPO A-37 Using PC


Hey Guys what's up?
In today's blog we are going to learn how to unroot and unbrick OPPO A-37 using pc
So let's get started for this you will need some things like:
1. A data cable for USB Connection.
2. An OPPO A-37 for flashing.
3. A Windows PC
4. A Strong Internet Connection for download.
So let's get started with today blog.
Install this Setup first Qualcomm Driver Link for driver: http://gestyy.com/e0LXKL
Then download the official firmware from my site link: http://gestyy.com/e0LXFU
Steps For Flashing:
First bring your OPPO A-37 mobile and switch off it (if its functional) otherwise you can proceed to next step.
Then, You have connect via USB to your Windows PC with pressing Volume UP + Volume DOWN on your mobile phone.
NOTE:  Please do backup your device if its functional because it is going to format all data and store your device to factory reset.
Now, if you are ready then Click on this tool on your Windows PC.
The Highlighted tool and run as an administrator.
OK, Now Tick mark this Option as shown in the picture.
That is the option for reset after download.
Now your Device is recognized like this as COM Device.
As shown in the Picture.
After the Computer recognized your Device press start on upper left hand side in tool.
OK, Now your flashing has been started.
After this you are going to see this message on your PC Screen like the Picture shown below.
Now your Phone will boot like normal and you have to go through the screen setup process as it was like new.

Congratulations
You Have succeeded
For reference you can see the YouTube Video given below:

Please Do Subscribe to my Channel if you are not !!!
  

No comments:

Post a Comment